Development of Centrifugal Partition Chromatography for the Purification of Antibody-Drug Conjugates.

Monoclonal antibody-drug conjugates (ADCs) are an expanding therapeutic class of biomolecules for which relatively few analytical and preparative separation options exist. Purification of ADCs with a specific drug antibody ratio is even more challenging. We report the first application of countercurrent separation (CCS) to this problem. An ADC mimic was successfully chromatographed using an aqueous two-phase system (ATPS) consisting of PEG 1000/sodium citrate pH 7.5/water, 17.75/17.75/64.50 (w/w/w). Notably, different partition coefficients (K) in this ATPS for the ADC mimic (0.09 < K < 0.16) and its monoclonal antibody backbone, IgG (0.16 < K < 0.27), were observed using CCS. Differential elution behavior of such high-molecular-weight biomolecules, 146,441 vs. ∼150,000 Da, using CCS has no precedent. The results provide a proof of concept for further exploration of the application of ATPSs and CCS to the separation of ADCs.

Diagnosis of Agglomeration and Crystallinity of Active Pharmaceutical Ingredients in Over the Counter Headache Medication by Electrospray Laser Desorption Ionization Mass Spectrometry Imaging.

Agglomeration of active pharmaceutical ingredients (API) in tablets can lead to decreased bioavailability in some enabling formulations. In a previous study, we determined that crystalline APIs can be detected as agglomeration in tablets formulated with amorphous acetaminophen tablets. Multiple method advancements are presented to better resolve agglomeration caused by crystallinity in standard tablets. In this study, we also evaluate three "budget" over-the-counter headache medications (subsequently labeled as brands A, B, and C) for agglomeration of the three APIs in the formulation: Acetaminophen, aspirin, and caffeine. Electrospray laser desorption ionization mass spectrometry imaging (ELDI-MSI) was used to diagnose agglomeration in the tablets by creating molecular images and observing the spatial distributions of the APIs. Brand A had virtually no agglomeration or clustering of the active ingredients. Brand B had extensive clustering of aspirin and caffeine, but acetaminophen was observed in near equal abundance across the tablet. Brand C also had extensive clustering of aspirin and caffeine, and minor clustering of acetaminophen. These results show that agglomeration with active ingredients in over-the-counter tablets can be simultaneously detected using ELDI-MS imaging.

Stability Indicating Method for Polysorbate 80 in Protein Formulations.

Polysorbates (also known as "Tween") are common components of protein formulations used to minimize protein adsorption and stabilize the protein. These nonionic surfactants are heterogenous mixtures of fatty acids with a complex reversed-phase profile due to the inhomogeneity of the polymers present. Polysorbates can be oxidized, which can be hard to detect in the complex polymer profile. Further adding to the analytical challenge is the lack of a chromophore for the detection of these polymers. The routine analysis of polysorbates in protein formulations was greatly improved through the introduction of online solid-phase extraction (SPE) to simplify the polysorbate profile for quantification. However, this method combines many of the polysorbate polymers into a single peak for detection, thus limiting its effectiveness for detecting degradation. To address the need for a stability indicating method without the complexity of the reversed-phase profile, an optimized online SPE method was developed and investigated. Using polysorbate 80, this investigation shows that further expanding the step gradient can yield a profile that is stability indicating and available for routine testing of protein formulation.

Biphasic Dissolution as an Exploratory Method During Early Drug Product Development.

Dissolution testing is a major tool used to assess a drug product's performance and as a quality control test for solid oral dosage forms. However, compendial equipment and methods may lack discriminatory power and the ability to simulate aspects of in vivo dissolution. Using low buffer capacity media combined with an absorptive phase (biphasic dissolution) increases the physiologic relevance of in vitro testing. The purpose of this study was to use non-compendial and compendial dissolution test conditions to evaluate the in vitro performance of different formulations. The United States Pharmacopeia (USP)-recommended dissolution method greatly lacked discriminatory power, whereas low buffer capacity media discriminated between manufacturing methods. The use of an absorptive phase in the biphasic dissolution test assisted in controlling the medium pH due to the drug removal from the aqueous medium. Hence, the applied non-compendial methods were more discriminative to drug formulation differences and manufacturing methods than conventional dissolution conditions. In this study, it was demonstrated how biphasic dissolution and a low buffer capacity can be used to assess in vitro drug product performance differences. This can be a valuable approach during the early stages of drug product development for investigating in vitro drug release with improved physiological relevance.

Rapid diagnosis of drug agglomeration and crystallinity in pharmaceutical preparations by electrospray laser desorption ionization mass spectrometry imaging.

In this study we evaluate the applicability of electrospray laser desorption ionization mass spectrometry imaging (ELDI-MSI) to interrogate tablet formulations for the spatial distributions of ingredients. Tablet formulations with varying amounts of crystalline acetaminophen (the active pharmaceutical ingredient, API) were analyzed to determine if crystallinity could be evaluated via ELDI-MSI. ELDI-MSI concurrently imaged the (API, binders, and surfactants. The spatial distributions of amorphous API were very similar to that of the surfactants and different from that of crystalline API. The higher the crystallinity in the tablet formulation, the more agglomeration of the active ingredient was observed by ELDI-MSI. This study shows the capability of ELDI-MSI to diagnose agglomeration and crystallinity content in pharmaceutical preparations with little to no sample preparation. The ability to concurrently image APIs with other components provides valuable information as to their form in the tablet.

In silico Tools at Early Stage of Pharmaceutical Development: Data Needs and Software Capabilities.

In early drug development, the selection of a formulation platform and decisions on formulation strategies have to be made within a short timeframe and often with minimal use of the active pharmaceutical ingredient (API). The current work evaluated the various physicochemical parameters required to improve the prediction accuracy of simulation software for immediate release tablets in early drug development. DDDPlus™ was used in simulating dissolution test profiles of immediate release tablets of ritonavir and all simulations were compared with experimental results. The minimum data requirements to make useful predictions were assessed using the ADMET predictor (part of DDDPlus) and Chemicalize (an online resource). A surfactant model was developed to estimate the solubility enhancement in media containing surfactant and the software's transfer model based on the USP two-tiered dissolution test was assessed. One measured data point was shown to be sufficient to make predictive simulations in DDDPlus. At pH 2.0, the software overestimated drug release while at pH 1.0 and 6.8, simulations were close to the measured values. A surfactant solubility model established with measured data gave good dissolution predictions. The transfer model uses a single-vessel model and was unable to predict the two in vivo environments separately. For weak bases like ritonavir, a minimum of three solubility data points is recommended for in silico predictions in buffered media. A surfactant solubility model is useful when predicting dissolution behavior in surfactant media and in silico predictions need measured solubility data to be predictive.

Simulated, biorelevant, clinically relevant or physiologically relevant dissolution media: The hidden role of bicarbonate buffer.

In-vitro dissolution testing of pharmaceutical formulations has been used as a quality control test for many years. At early drug product development, in vivo predictive dissolution testing can be used for guidance in the rational selection of candidate formulations that best fit the desired in vivo dissolution characteristics. At present, the most widely applied dissolution media are phosphate-based buffers and, in some cases, the result of dissolution tests performed in such media have demonstrated reasonable/acceptable IVIVCs. However, the presence of phosphates in human GI luminal fluids is insignificant, which makes the use of such media poorly representative of the in vivo environment. The gastrointestinal lumen has long been shown to be buffered by bicarbonate. Hence, much interest in the development of suitable biorelevant in vitro dissolution media based on bicarbonate buffer systems has evolved. However, there are inherent difficulties associated with these buffers, such as maintaining the pH throughout the dissolution test, as CO2 tends to leave the system. Various mathematical models have been proposed to analyze bicarbonate buffers and they are discussed in this review. Approaches such as using simpler buffer systems instead of bicarbonate have been proposed as surrogate buffers to produce an equivalent buffer effect on drug dissolution on a case-by-case basis. There are many drawbacks related to simpler buffers systems including their poor in vivo predictability. Considerable discrepancies between phosphate and bicarbonate buffer dissolution results have been reported for certain dosage forms, e.g. enteric coated formulations. The role and need of bicarbonate-based buffers in quality control testing requires scientific analysis. This review also encompasses on the use of bicarbonate-based buffers as a potentially in vivo predictive dissolution medium for enteric coated dosage forms.

Industry's View on Using Quality Control, Biorelevant, and Clinically Relevant Dissolution Tests for Pharmaceutical Development, Registration, and Commercialization.

This article intends to summarize the current views of the IQ Consortium Dissolution Working Group, which comprises various industry companies, on the roles of dissolution testing throughout pharmaceutical product development, registration, commercialization, and beyond. Over the past 3 decades, dissolution testing has evolved from a routine and straightforward test as a component of end-product release into a comprehensive set of tools that the developer can deploy at various stages of the product life cycle. The definitions of commonly used dissolution approaches, how they relate to one another and how they may be applied in modern drug development, and life cycle management is described in this article. Specifically, this article discusses the purpose, advantages, and limitations of quality control, biorelevant, and clinically relevant dissolution methods.

Approaches for Establishing Clinically Relevant Dissolution Specifications for Immediate Release Solid Oral Dosage Forms.

This manuscript represents the perspective of the Dissolution Analytical Working Group of the IQ Consortium. The intent of this manuscript is to highlight the challenges of, and to provide a recommendation on, the development of clinically relevant dissolution specifications (CRS) for immediate release (IR) solid oral dosage forms. A roadmap toward the development of CRS for IR products containing active ingredients with a non-narrow therapeutic window is discussed, within the context of mechanistic dissolution understanding, supported by in-human pharmacokinetic (PK) data. Two case studies present potential outcomes of following the CRS roadmap and setting dissolution specifications. These cases reveal some benefits and challenges of pursuing CRS with additional PK data, in light of current regulatory positions, including that of the US Food and Drug Administration (FDA), who generally favor this approach, but with the understanding that both industry and regulatory agency perspectives are still evolving in this relatively new field. The CRS roadmap discussed in this manuscript also describes a way to develop clinically relevant dissolution specifications based primarily on dissolution data for batches used in pivotal clinical studies, acknowledging that not all IR product development efforts need to be supported by additional PK studies, albeit with the associated risk of potentially unnecessarily tight manufacturing controls. Recommendations are provided on what stages during the life cycle investment into in vivo studies may be valuable. Finally, the opportunities for CRS within the context of post-approval changes, Modeling and Simulation (M&S), and the application of biowaivers, are briefly discussed.

Justification of disintegration testing beyond current FDA criteria using in vitro and in silico models.

Drug product performance testing is an important part of quality-by-design approaches, but this process often lacks the underlying mechanistic understanding of the complex interactions between the disintegration and dissolution processes involved. Whereas a recent draft guideline by the US Food and Drug Administration (FDA) has allowed the replacement of dissolution testing with disintegration testing, the mentioned criteria are not globally accepted. This study provides scientific justification for using disintegration testing rather than dissolution testing as a quality control method for certain immediate release (IR) formulations. A mechanistic approach, which is beyond the current FDA criteria, is presented. Dissolution testing via United States Pharmacopeial Convention Apparatus II at various paddle speeds was performed for immediate and extended release formulations of metronidazole. Dissolution profile fitting via DDSolver and dissolution profile predictions via DDDPlus™ were performed. The results showed that Fickian diffusion and drug particle properties (DPP) were responsible for the dissolution of the IR tablets, and that formulation factors (eg, coning) impacted dissolution only at lower rotation speeds. Dissolution was completely formulation controlled if extended release tablets were tested and DPP were not important. To demonstrate that disintegration is the most important dosage form attribute when dissolution is DPP controlled, disintegration, intrinsic dissolution and dissolution testing were performed in conventional and disintegration impacting media (DIM). Tablet disintegration was affected by DIM and model fitting to the Korsmeyer-Peppas equation showed a growing effect of the formulation in DIM. DDDPlus was able to predict tablet dissolution and the intrinsic dissolution profiles in conventional media and DIM. The study showed that disintegration has to occur before DPP-dependent dissolution can happen. The study suggests that disintegration can be used as performance test of rapidly disintegrating tablets beyond the FDA criteria. The scientific criteria and justification is that dissolution has to be DPP dependent, originated from active pharmaceutical ingredient characteristics and formulations factors have to be negligible.

Use of ionic liquids as headspace gas chromatography diluents for the analysis of residual solvents in pharmaceuticals.

In this study, two ionic liquids (ILs), 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([BMIM][NTf2]) and trihexyltetradecylphosphonium bis[(trifluoromethyl)sulfonyl]imide ([P66614][NTf2]) were examined as contemporary diluents for residual solvent analysis using static headspace gas chromatography (SHS-GC) coupled with flame ionization detection (FID). ILs are a class of non-molecular solvents featuring negligible vapor pressure and high thermal stabilities. Owing to these favorable properties, ILs have potential to enable superior sensitivity and reduced interference, compared to conventional organic diluents, at high headspace incubation temperatures. By employing the [BMIM][NTf2] IL as a diluent, a 25-fold improvement in limit of detection (LOD) was observed with respect to traditional HS-GC diluents, such as N-methylpyrrolidone (NMP). The established IL-based method demonstrated LODs ranging from 5.8 parts-per-million (ppm) to 20ppm of residual solvents in drug substances. The optimization of headspace extraction conditions was performed prior to method validation. An incubation temperature of 140°C and a 15min incubation time provided the best sensitivity for the analysis. Under optimized experimental conditions, the mass of residual solvents partitioned in the headspace was higher when using [BMIM][NTf2] than NMP as a diluent. The analytical performance was demonstrated by determining the repeatability, accuracy, and linearity of the method. Linear ranges of up to two orders of magnitude were obtained for class 3 solvents. Excellent analyte recoveries were obtained in the presence of three different active pharmaceutical ingredients. Owing to its robustness, high throughput, and superior sensitivity, the HS-GC IL-based method can be used as an alternative to existing residual solvent methods.

Expanding the analytical toolbox: pharmaceutical application of quantitative NMR.

In response to the changing market pressures being applied to the pharmaceutical industry, a greater emphasis is being made to advance new drugs to market with minimal investment in early development stages. The use of quantitative NMR (q-NMR) has been shown to be a single point replacement for routine early development testing which previously combined elements of identity testing, chromatographic assay, moisture analysis, residual solvent analysis, and elemental analysis. This Feature will highlight the applications of q-NMR to early phase drug development testing and its efficient potency, solvent quantification, and relative response factor determinations.

Screening of Pirkle-type chiral stationary phases for HPLC enantioseparations.

The majority of enantiomeric separations for purity analysis and quality control continue to be performed by normal-phase liquid chromatography and supercritical fluid chromatography. In this chapter, representative chromatographic screening procedures for the enantioseparations using Pirkle-type stationary phases are presented. As Pirkle-type phases are commonly applied to the preparative chromatographic isolation of enantiomers, volatile modifiers are used in this screen in order to be subsequently compatible with the techniques used to recover analytes from preparative scale isolations. The Stage 1 screen presented here is used initially for screening chiral entities. The gradients use cyclohexane and ethanol both with and without chromatographic modifiers. The Stage 2 screen is used for more challenging to resolve compounds that do not exhibit resolution using the Stage 1 screening procedure.

The solubility-permeability interplay when using cosolvents for solubilization: revising the way we use solubility-enabling formulations.

We have recently reported the interplay between apparent aqueous solubility and intestinal membrane permeability, showing the trade-off between the two when using cyclodextrin- and surfactant-based systems as solubility-enabling formulations. In these cases, the decreased permeability could be attributed directly to decreased free fraction of drug due to the complexation/micellization inherent in these solubilization methods. The purpose of this study was to investigate the direct solubility-permeability interplay, using formulations in which complexation is not the mechanism for increased solubilization. The apparent aqueous solubility (S(aq)) and rat intestinal permeability (P(eff)) of the lipophilic drug progesterone were measured in systems containing various levels of the cosolvents propylene glycol and PEG-400, since this solubilization method does not involve decreased free fraction. Thermodynamic activity was maintained equivalent in all permeability studies (75% equilibrium solubility). Both cosolvents increased progesterone S(aq) in nonlinear fashion. Decreased P(eff) with increased S(aq) was observed, despite the constant thermodynamic activity, and the nonrelevance of free fraction. A mass-transport analysis was developed to describe this interplay. The model considers the effects of solubilization on the membrane permeability (P(m)) and the unstirred water layer (UWL) permeability (P(aq)), to predict the overall P(eff) dependence on S(aq). The analysis revealed that (1) the effective UWL thickness quickly decreases with ↑S(aq), such that P(aq) markedly increases with ↑S(aq); (2) the apparent membrane/aqueous partitioning decreases with ↑S(aq), thereby reducing the thermodynamic driving force for permeability such that ↓P(m) with ↑S(aq); (3) since ↑P(aq) and ↓P(m) with ↑S(aq), the UWL is shorted out and P(eff) becomes membrane control with ↑S(aq). The model enabled excellent quantitative prediction of P(eff) as a function of S(aq). This work demonstrates that a direct trade-off exists between the apparent solubility and permeability, which must be taken into account when developing solubility-enabling formulations to strike the optimal solubility-permeability balance, in order to maximize the overall oral absorption.

Analysis of PEG 400 in perfusate samples by aqueous normal phase (ANP) chromatography with evaporative light scattering detection.

A rapid method for the analysis of polyethylene glycol (PEG 400) in perfusate samples is presented. Because PEG 400 lacks a strong chromophore in the UV range, detection was accomplished using evaporative light scattering detection (ELSD). In order to optimize the ELSD signal performance for a volatile mobile phase, the chromatographic separation was optimized using aqueous normal phase conditions on a Cogent® Diamond Hydride column.

Estimating the number of coronary artery bypass graft and percutaneous coronary intervention procedures in Canada: a comparison of cardiac registry and Canadian Institute for Health Information data sources.

BACKGROUND: Provincial cardiac registries and the Canadian Institute for Health Information (CIHI) pan-Canadian administrative databases are invaluable tools for understanding Canadian cardiovascular health and health care. Both sources are used to enumerate cardiovascular procedures performed in Canada. OBJECTIVE: To examine the level of agreement between provincial cardiac registry data and CIHI data regarding procedural counts for coronary artery bypass grafts (CABGs) and percutaneous coronary interventions (PCIs). METHODS: CIHI staff obtained CABG and PCI counts from seven provinces that, in 2004, performed these procedures and had a cardiac registry (ie, British Columbia, Alberta, Saskatchewan, Manitoba, Ontario, Nova Scotia, and Newfoundland and Labrador). Structured mail questionnaires, and e-mail and telephone follow-ups elicited information from a designated registry respondent. The CIHI derived its counts of CABG and PCI procedures by applying the geographical boundaries, procedural definitions and analytical case criteria used by the cardiac registries to CIHI inpatient and day procedure databases. Steps were taken to reduce double-counting procedures when combining results from the two CIHI databases. Two measures were calculated: the absolute difference between registry and CIHI estimates, and the per cent agreement between estimates from the two sources. RESULTS: All seven cardiac registries identified as eligible for the study participated. Agreement was high between the two sources for CABG (98.8%). For PCI, the level of agreement was high (97.9%) when CIHI sources were supplemented with day procedure data from Alberta. CONCLUSIONS: The high level of agreement between cardiac registry and CIHI administrative data should increase confidence in estimates of CABG and PCI counts derived from these sources.

Validation of pharmaceutical potency determinations by quantitative nuclear magnetic resonance spectrometry.

With the changing development paradigms in the pharmaceutical industry, laboratories are challenged to release materials for clinical studies with rapid turnaround times. To minimize cost demands, many businesses are looking to develop ways of using early Good Manufacturing Practice (GMP) materials of active pharmaceutical ingredients (API) for Good Laboratory Practice (GLP) toxicology studies. To make this happen, the analytical laboratory releases the material by one of three scenarios: (1) holding the GLP release until full GMP testing is ready, (2) issuing a separate lot number for a portion of the GMP material and releasing the material for GLP use, or (3) releasing the lot of material for GLP using alternate (equivalent) method(s) not specified for GMP release testing. Many companies are finding the third scenario to be advantageous in terms of cost and efficiency through the use of quantitative nuclear magnetic resonance (q-NMR). The use of q-NMR has proved to be a single-point replacement for routine early development testing that previously combined elements of identity testing, chromatographic assay, moisture analysis, residual solvent analysis, and elemental analysis. This study highlights that q-NMR can be validated to meet current regulatory analytical method guidelines for routine pharmaceutical analysis.

Determination of relative response factors for chromatographic investigations using NMR spectrometry.

In the absence of suitable reference materials for impurity quantitation, laboratories have developed techniques using mass detectors such as the chemical luminescence detector (CLND) and the charged aerosol detector (CAD) to normalize the UV response of each impurity of interest by their molar ratios and thus generate relative response factors without requiring isolated and purified compound-specific standards. While effective, these detectors are limited in response and are effective only with specific mobile phase requirements. Nuclear magnetic resonance (NMR) spectrometry has the advantage of allowing the universal detection of protons while not suffering from the limitations observed for CLND, CAD, and other common detectors. The determination of relative response factors using NMR has been successfully applied to several LC methods. An overview of this technique and representative results are presented.

An evaluation of four commercial HPLC chiral detectors: a comparison of three polarimeters and a circular dichroism detector.

With increasing frequency, new drug candidates being introduced into pharmaceutical drug pipelines are chiral. Often only one enantiomer exhibits the desired biological activity and the other enantiomer may exhibit undesired side effects, thereby making chiral purity an important parameter. The introduction of chiral analysis adds additional complications in drug development. The pharmaceutical industry is constantly striving to streamline processes and improve efficiencies in an effort to move molecules to market quickly. In order to simplify the process of chiral method development, chiral screening can be set up, however a successful chiral screen depends on optimizing two factors: the column and the detector. The following work investigated the second factor and evaluated two types of commercially available chiral detectors for their possible use in chiral method development and screening: polarimeters and circular dichroism (CD) detectors. Linearity, precision, and the limit of detection (LD) of six compounds (trans-stilbene oxide, ethyl chrysanthemate, propranolol, 1-methyl-2-tetralone, naproxen, methyl methionine) on four commercial detectors (three polarimeters and one CD detector) were determined experimentally and the limit of quantitation (LQ) calculated from the experimental LD. Trans-stilbene oxide worked well across all the detectors, showing good linearity, precision and low detection limits. However, the other five compounds proved to be more discriminating and showed that the circular dichroism detector performed better as a detector for chiral screens, over the polarimeters.

Determination of active pharmaceutical ingredients by heteroatom selective detection using inductively coupled plasma mass spectrometry with ultrasonic nebuilization and membrane desolvation sample introduction.

The combination of ultrasonic nebulization with membrane desolvation (USN-MD) is utilized to determine active pharmaceutical ingredients (API) by heteroatom inductively coupled mass spectroscopy (ICP-MS) detection. Ultrasonic nebulization provides efficient sampling while use of the membrane desolvator acts to reduce solvent-based interferences. This approach reduces interferences sufficiently so that a standard argon ICP-quadrupole MS can be utilized. Examined APIs and associated heteroatoms included: phosphomycin (P), amoxicillin (S), chlorpropamide (Cl), and ofloxacin (F). The optimum plasma r.f. powers for P, S, and Cl were in the 1000 to 1200 watts range. The high ionization energy of F required that the plasma be operated at 1500 W. The 16O2+ interference at mass 32 precluded determinations using the sulfur-32. The sulfur-34 (4.2% natural isotopic abundance), however, was relatively free of isobaric interferences. Interferences were relatively small at the mass 35 isotope of Cl, but increased with higher ICP r.f. powers. Overlaps were significant at the masses of monoisotopic species, fluorine-19 and phosphorus-31. Detection limits for P, S, Cl, and F of 2, 3, 90, and 3000 ng/mL, respectively, were generally lower than those produced with other quadrupole systems and comparable to or better than values published utilizing high-resolution instruments.